by Jeff Tuzik The 20th annual Wheel/Rail Interaction Conference drew a record number of attendees and speakers from around the world. They came to contribute to and draw from the growing body of knowledge on wheel/rail interaction. Since the conference began 20 years ago, the industry has come a …
By Stephen S. Woody Part 1 of this article examined the results of a six-sigma project that Norfolk Southern initiated to improve the efficiency of its grinding program. Part 2 illustrated some the data analysis-related problems that NS experienced and learned from during other six-sigma projects. Part 3 describes two ideas …
Part 1. Metallurgy, Wheel/Rail Profile Design and Maintenance. by Bob Tuzik, January 2014 Ask a group of railroaders, researchers or suppliers what the essential aspects of understanding wheel/rail interaction have been over the past 20 years, and you’ll get a host of answers. But among them, major categories consistently emerge: …
By Jeff Tuzik • October, 2008 Part 1 of this article examined efforts to optimize vehicle and track component performance through various testing, monitoring and simulation programs. Part 2 continues on the theme of “data to information,” further exploring such programs and the operational benefits they engender. Maintaining a Safe Neutral Temperature (SFT) on …
By Bob Tuzik • July, 2008 As research into wheel/rail interaction has evolved, the emphasis has moved toward implementation of available technology and conversion of data into information. Such was the case at Wheel/Rail Interaction ’08, the 14th annual seminar produced by Advanced Rail Management and sponsored by Progressive Railroading magazine. Railroaders, researchers …
By Anders Frick and Dr. Wolfgang Schoech • July, 2008 Rail maintenance work is a process of removing metal from the rail head at the right time and at the right place. At first, rail grinding was performed to remove surface irregularities and defects — a process that required significant metal …
By Bob Tuzik • January, 2008 All railways must deal with operating/engineering and vehicle/track interaction issues. But rail transit systems, which operate under the microscope of the urban environment, face special, often unique, challenges. Speakers at Rail Transit ’07, Advanced Rail Management and Interface Journal’s third seminar devoted to wheel/rail interaction on rail …
By Edgar Fischmeister, Markus Ossberger, Roman Pongracz and Paul Mittermayr • January, 2008 Part 1 of this article can be seen here. Rail Grinding Traditionally, the rail head at Wiener Linien was ground as a five-sided polygon (see Figure 1). This approach has some negative impact on wheel wear, especially in …
By Stephen S. Woody • January, 2008 Part 1 of this article examined the results of a six-sigma project that Norfolk Southern initiated to improve the efficiency of its grinding program. Part 2 illustrates some the data analysis-related problems that NS experienced and learned from during other six-sigma projects. One of the most …
By Stephen S. Woody • October, 2007 Quality concepts have been used in various industries for many years to improve productivity, reduce expenses, and eliminate defects. Work done by the Norfolk Southern Research and Tests Department has begun to show that applying quality concepts to wheel/rail interaction can lead to significant operational …